menu
 

Valid HTML 4.01 Transitional

ibc%mixers portable%20mixers top%20entry
stainless%20steel%20roll
magnetic%20drive
high%20shear
brochures
bar
footer
Legal | Terms and Conditions | ©2003-2007 EuroMixers Limited | Web Design by Barry Worsley
banner

top_entry_heavy_duty

 

portable

IBC Mixers / Agitators

Euromixers unique range of IBC mixers / agitators with E-400 folding impellers have been designed for use with plastic Intermediate Bulk Containers (IBC’s) with a 150mm screw cap, the E-400 folding impeller fits through a standard 150mm opening on the IBC, the IBC mixer mounts directly onto the IBC’s metal frame to quickly re-suspended product that has settled in transportation or storage.

“Using the IBC as a mixing vessel, offers significant cost savings on transfer and cleaning time”

ibc-mixerAPPLICATIONS
Chemical Industries : Dyestuffs and pigments : Slurry’s : Paint and varnish : Food and beverage : Water treatment chemicals and flocculants : Cosmetics industry.

CONTAINER
Euromixers IBC mixers / agitators are
designed for use on 1000 / 800 litre Intermediate Bulk Containers – IBC’s with 150mm screw caps and are suitable for most container types, including Schutz Ecobulk, Sotralentz, Werts, Van Leer

IBCmixerElectricTECHNICAL SPECIFICATION.

 The IBC mixer / agitator drive is  mounted on a lightweight  stainless steel bridge that mounts directly on to the IBC  frame and is secured in place with quick action toggle  clamps.
 As standard the IBC mixer / agitator is supplied with an eye  bolt for lifting for use with a hoist, or optional fork lift module  – for lifting with a fork lift truck

ELECTRIC DRIVE
Gear drives are factory filled with a food quality synthetic lubricant, electric motors are fitted with direct on line starter and overload protection, connection to the unit is with a 16 amp appliance inlet.

SafetySwitch A safety switch is integrated into the mixer support bridge  and wired to the motor control to prevent the mixer from  being started when not mounted on an IBC .

 Standard electric motors are
 380 - 415 volts 3 ph 50 Hz
 240 v or 110volts 1ph 50 Hzibc-air-drive



AIR DRIVE

Air motors are supplied fitted with a flow control valve to regulate motor speed and an exhaust muffler.
Estimated air consumption graphs and operating pressures can be found in the IBC mixer brochure.

SHAFT AND IMPELLERS
E-400 folding impellers have been designed to fit through the standard 150mm opening on an IBC to provide effective mixing over a wide range of products
High speed mixers are fitted with fixed impellers and low speed mixers with E-400 folding impellers

ibc-shaft-closed
E-400 Folding Impeller – closed
E-400 Folding Impeller – operating

MIXER SIZING AND SELECTION
The following tables provide a general selection guide. Our application engineers will be pleased to advise on mixers / agitators suitable for your specific application.

Mild to Medium Agitation – 1000 Liter IBC
IBC-MMA

Vigorous Agitation – 1000 Liter IBC
IBC_VA

ENQUIRIES / ORDERING
Please mention the mixing duty together with the SG and viscosity to enable our application engineers to recommend a suitable IBC mixer for your application.

BROCHURE

brochure

Click to download brochure

Tel - + 44 (0) 161 449 8559                                                                   e-mailClick Here